When using as abottle warmer, you should put the bottle first and then add water. The height of the water surface should be about 2cm lower than the port of the milk warmer. Adjust the knob to select the desired temperature. After a few minutes, the indicator light turns off, indicating that the water temperature has reached the required level. Because of the barrier of the bottle, the milk temperature in the bottle will take 1,2 minutes to reach the water temperature outside the bottle. For unfinished milk, you can put it back in the milk warmer to keep it warm, and then take it out when you need to drink it.
If you want to heat the tea in the metal cup, you can remove the water container and place the cup directly on the electric heating plate. Pre-drop a small amount of water on the surface of the stainless steel plate to conduct heat, which can improve the heating efficiency.
2. The usage of digital timing milk warmer: After turning on the power, the temperature can be controlled independently by the + or-key, and the machine will enter the heating state after the key is stopped for 3 seconds. Use the timer switch, after selecting the appropriate temperature, press the timer button, and select the timer value by the + or-button, then the machine enters the countdown process, and enters the heating state after resetting.
3. Use of water-free milk warmer: remove the grid, put the bottle cap on the heat preservation cover, and select the appropriate temperature through the knob.
